Lab
Additive Manufacturing Lab

Image
ultimarker

Filament-based 3D printer.

Image
Automated Hardness Tester

This hardness tester by Buehler a state-of-the-art automated testing machine that allows Vickers and Knoop indentation testing. The indentation load range is between 0.05 and 10kgf. This equipment has ISO and ASTM certified Vickers indenter. For measurements, navigation, and imaging, the system is equipped with 10x and 50x long working distance objectives. A motorized stage 180x180mm stage (travel 110x140mm) is used for the automation process and navigation across the samples. Furthermore, a 5 MP bright field overview camera is attached for sample navigation, scanning etc.

Image
Aconity

A complete Additive Manufacture platform with capability of working with different materials, 2 high power lasers with capability of working with up to 4 lasers, that allows in-situ heat treatments

Image
Particles Analyzer

The Particle Analyzer acquired from Malvern Panalytical uses laser diffraction to measure the particle size of free-flowing powder, as well as its distribution. This is an essential kit for characterizing the feedstock material used in L-PBF. The system available at TII is equipped with both wet and dry measuring cells.

Image
tube

This tube furnace operates under controlled atmosphere (inert gas) and has a max operating temperature of 1200°C. The tube (chamber) is 400 mm in length and 125 mm in diameter.

Lab
Advanced Functional Materials Lab

Image
Battery Cycle

BCS-800 series is a modular battery cycling system offering 8 independent channels with a maximum current of ±150 mAand ±1.5, respectively per channel.

Image
Electrospinning Machine

Nanofiber Electrospinning Machine is a system for producing ultra-fine fiber with diameter of 20-1000nm. The nanofiber has very high specific surface area, small diameter and large porosity.

Image
Glove Box.

Air/moisture sensitive powders dedicated workspace, for materials handling, ink preparation, casting and drying, coin cells fabrication and dismantling. Gloveboxes are enclosed chambers supplied with inert gases such as Argon or Nitrogen, with continuous monitoring of O2 and H2O levels.

Image
potentiostat

Potentiostat / galvanostat with +/- 1A (expandable) with built-in EIS (Electrochemical Impedance Spectroscopy) capability.

Lab
MetaSmart Materials Lab

Image
3D Printer-

Millimiter-sized 3D polymeric objects printer

Image
Dynamic Mechanical

Devise for obtaining the material viscoelastic properties. Up to 200Hz and from -100C up to 300C.

Image
Laser vibrometer

Laser-doppler effect-based instrument to measure vibrations velocities on samples

Image
Nanoscribe

Micro-sized 3D polymeric objects printer

Nanoscribe

Image
Transmission loss tube

Microphones based tube for the measurement of acoustic pressure in materials